CONTAX CLUB Carl Zeiss 討論區

......算罷.......當parts賣咗佢算罷......

_________________
荒木超人

部167因為反光鏡下滑~~整花左1.4/35後組鏡片~~很多舊機都有相同問題的...^^

_________________
食菜冇前途～～飲奶係最好...^^

同個相機師傅吹了陳水，佢話Contax從來都沒有出過好的相機.......
但係作為用家的我，又唔覺得Contax太差，不過反光鏡弄花鏡頭在這個Forum都好似唔單止聽個一次...........
可能Contax出的都係電子機，電子機一定要有Parts，而香港又比較濕......其實了Contax S2外，部部機都會有壽命，而Parts係一定會有一天用玩......

那麼係咪要玩Leica...........Zeiss Ikon又或者數碼機..........唉！

好在我仲有部S2 Second Body.........本來玩兩個Contax Bodies好正，唔洗等Slide Print Film Black and White..........好多時想拍咁便用咁，現在得番一部機，好唔自在.............

Buy one more body la.

I got two already.......one need repair..............and other in perfect condition.

Third body

of course

Forgot the exact cost, around $1500, not more than $2000.
already 20% off

_________________
荒木超人

個菲林蓋掩不實，出現漏光。師傅最初話要換後蓋，但無貨，要等。
一星期後打來話只需換個lock，parts連人工要500，一星期可取。

同場問師傅cla支25/2.8 同200/3.5幾錢？佢話aeg最少每支鏡1.5k ，要換鏡片的話另計

_________________
攝影小功夫，容人大丈夫。

Wish List:
Distagon 1,4/35 ; Rollei SL66 S-Planar 120/5.6; 150/4 HFT

and all is subject to the lens is still available...

_________________
放毒二課　首席陪行專員

[二人同行　送你上路]

Actually, it is a reasonable price.
If you see the final result after CLA and their cleaning result.

_________________
荒木超人

I want to know what's criteria for me to take lens for cla?

1. If no dust but 2nd hand;
2. have some dust;
3. others

If its just 2nd hand or have dust, then I suppose it simply do not made a cse for CLA. As those do not seem to be anything actually hampering the picture taking ability. So unless you got faulty mechanics, misplaced optics or loads of dust I simply cannot see a reason enough to service just for the sake of servicing !!

_________________

今天帶了部167MTBody去打價，個快門Jam了，要收$700，但係佢沒有話係幫我換新的快門..........其實佢最理想係咪只會用一部舊機用了多年的Parts，換上我部機到？

如果$700弄好了，三個月後又壞，咁點算，見到部$2000的二手Aria都好似只係多千三蚊，Aria會不會比較Reliable一些，因為設計是最新，而且係Porsche Design，有信心一點。

又聽各位大大講，Contax Body要留意個反射鏡會下滑而弄花心愛的鏡頭(如果係支85mm f1.2咪心都實！ )，想問會不會有方法可以防止？

據講要防止 (or 延遲) 反光鏡下滑, body 唔用果陣最好打平放 ... 不過就"呀"晒我個防潮櫃 d 位

I suggest using glue to stick the reflective mirror for prevention.

Of course, use a little bit.
For example, on corners only.