CONTAX CLUB Carl Zeiss 討論區

香港互聯網康泰時攝影會
現在的時間是 週五 29 3月 24 04:33:23

所有顯示的時間為 UTC + 8 小時




發表新文章 回覆主題  [ 54 篇文章 ]  前往頁數 上一頁  1234
發表人 內容
 文章主題 :
文章發表於 : 週三 06 12月 06 23:21:10 
CONTAX CLUB 會員
CONTAX CLUB 會員

註冊時間: 週六 08 11月 03 01:36:09
文章: 8818
Raimondi 寫:
Have to do research on pentax dslr now. is K100D better or 1stDL better? now i do not need to start a ZF or ZA series.


Raimondi .. ZF 仍然值得考慮 .. :lol: :lol:


回頂端
 個人資料  
 
 文章主題 :
文章發表於 : 週四 07 12月 06 09:22:48 
討論區新手

註冊時間: 週六 02 9月 06 12:01:12
文章: 28
Choyin 寫:
OK here is the revised procedure, For better understanding, I have also disemmble my istDL for study:

1. Remove the blue marked area of the mount.
2. Remove the thin metal (M42 stopper) on the 2nd layer ring beneath the mount
3. Sand away 0.2mm of thickness of the metal mount
4. Cut away the plastic screw support.

But I have found a minor difficulty which dosen't matter on the modication. There is a welded wire connected to the tin metal ring with the M42 stopper. did you cut it off or there is no such thing in K100D?


I have attempted to refine the workflow as follows -

1. Remove the blue marked area of the mount.

2. Remove the thin metal (M42 stopper) on the 2nd layer ring beneath the mount.

3. Re-fix the mount to the camera body. Put on the C/Y lenses and shoot at infinity to check if the register is correct. (From my experience, P85/1.4 should be the best to perform the test as it requires highest accuracy in getting a picture of superb quality)

4. If infinity focus is okay - Congratuation! Your Pentax DSLR is now ready for C/Y lenses.
If a blurred picture is got when focusing at infinity - go to step 5.

5. Unscrew the mount again and sand away a considerable thickness of the metal mount. A unit of 0.1mm or so is recommended as a extremely small difference in the register would be able to cause a huge difference.

6. Cut away a thin layer of the plastic screw support on the camera body which is equal to the thickness of the metal mount being sanded away in step 5. Also removed a circle of the plastic (of the same thickness) immediately beneath the thin metal (M42 stopper). If this circle of plastic is not removed, there will not be any difference in the register even the metal mount and the screw support is modified.

7. Re-fix the mount again and test if focus at infinity is okay now. Repeat step 5 and 6 if necessary.


As for the welded wire connected to the tin metal ring with the M42 stopper, I had accidentally cut it off but there is no effect on the camera. But as pointed out by vincenthoy28, ist DL will lost AF function if the wire is disconnected. Maybe the difference is due to design variations between the two models.


回頂端
 個人資料  
 
 文章主題 :
文章發表於 : 週五 08 12月 06 12:29:00 
資深討論區會員

註冊時間: 週五 27 1月 06 12:09:10
文章: 550
來自: Singapore
I have successfully converted my DL. However, I believe due to testing without all screws tightened I damaged one of the three lens retaining springs. Managed to repair it.

Was trying to remove the M42 stopper without removing the black wire but it was just too difficult so finally I desoldered the wire but was soldered back after the mod. This part difficult for me as I have lousy soldering skill.

Now the DL works with C/Y with infinity focusing, and still work with my only Pentax lens 28-70 f4 AL with auto focusing.

_________________
Rolleiflex 3003, SL2000F - SONY Alpha7R 1/2/4. A1
Carl Zeiss C/Y T* - QBM HFT - ZM T* - ZF T* - Batis T* - Otus T* - Loxia T*
Sony. Zeiss 16-35/4 T* G200600 GM100400 GM600
http://www.fuwen.net


回頂端
 個人資料  
 
 文章主題 :
文章發表於 : 週五 08 12月 06 14:24:12 
討論區會員

註冊時間: 週四 12 8月 04 08:54:31
文章: 315
fuwen 寫:
I have successfully converted my DL. However, I believe due to testing without all screws tightened I damaged one of the three lens retaining springs. Managed to repair it.

Was trying to remove the M42 stopper without removing the black wire but it was just too difficult so finally I desoldered the wire but was soldered back after the mod. This part difficult for me as I have lousy soldering skill.

Now the DL works with C/Y with infinity focusing, and still work with my only Pentax lens 28-70 f4 AL with auto focusing.


Wow, Congratulations. Please show us some photos taken by your c/y+Pentax.


回頂端
 個人資料  
 
 文章主題 :
文章發表於 : 週五 08 12月 06 14:58:25 
討論區會員

註冊時間: 週四 11 12月 03 00:07:44
文章: 105
等睇 result~~ 8) :D


回頂端
 個人資料  
 
 文章主題 :
文章發表於 : 週五 08 12月 06 15:57:10 
討論區新手

註冊時間: 週六 02 9月 06 12:01:12
文章: 28
fuwen 寫:
I have successfully converted my DL. However, I believe due to testing without all screws tightened I damaged one of the three lens retaining springs. Managed to repair it.

Was trying to remove the M42 stopper without removing the black wire but it was just too difficult so finally I desoldered the wire but was soldered back after the mod. This part difficult for me as I have lousy soldering skill.

Now the DL works with C/Y with infinity focusing, and still work with my only Pentax lens 28-70 f4 AL with auto focusing.


Congratuation! Waiting for your C/Y + DL pictures :D


回頂端
 個人資料  
 
 文章主題 :
文章發表於 : 週五 08 12月 06 22:11:31 
資深討論區會員

註冊時間: 週五 27 1月 06 12:09:10
文章: 550
來自: Singapore
Choyin 寫:

Wow, Congratulations. Please show us some photos taken by your c/y+Pentax.


Hi! Sorry to disappoint. I am a die hard film user and only like to take photos in film, at present UC100.

Digital SLR only for not so 'serious' stuff like take pictures of equipment for sale or for posting on my web site, for kids homework, etc.

I do have photos taken by Zeiss Contax and Rolleiflex on my web site. I do also have some photos of my ZM15 taken by my DL in my short article on ZM15. Taken by a very old Pentacon 30/3.5.

The DL so far shutter counts probably less than 300, bought for around a year. Just want to have some fun mod the body for Contax.

_________________
Rolleiflex 3003, SL2000F - SONY Alpha7R 1/2/4. A1
Carl Zeiss C/Y T* - QBM HFT - ZM T* - ZF T* - Batis T* - Otus T* - Loxia T*
Sony. Zeiss 16-35/4 T* G200600 GM100400 GM600
http://www.fuwen.net


回頂端
 個人資料  
 
 文章主題 :
文章發表於 : 週二 10 4月 07 15:09:07 
資深討論區會員

註冊時間: 週三 25 8月 04 22:43:48
文章: 4793
k10d又用唔用到c/y?

_________________
我很窮,但我愛contax!


回頂端
 個人資料  
 
 文章主題 :
文章發表於 : 週二 10 4月 07 16:05:51 
事務局長
事務局長

註冊時間: 週日 09 11月 03 03:42:29
文章: 12296
King 寫:
k10d又用唔用到c/y?

Personally recommandation...don't wast time...go for M42 mount ZS directly...

_________________
事務局長

Damn, my Calon Segur heart fall in love with Haut Brion


回頂端
 個人資料  
 
顯示文章 :  排序  
發表新文章 回覆主題  [ 54 篇文章 ]  前往頁數 上一頁  1234

所有顯示的時間為 UTC + 8 小時


誰在線上

正在瀏覽這個版面的使用者:沒有註冊會員 和 14 位訪客


不能 在這個版面發表主題
不能 在這個版面回覆主題
不能 在這個版面編輯您的文章
不能 在這個版面刪除您的文章

搜尋:
前往 :  
cron
Powered by phpBB® Forum Software © phpBB Group
正體中文語系由 竹貓星球 維護製作