CONTAX CLUB Carl Zeiss 討論區

香港互聯網康泰時攝影會
現在的時間是 週四 28 3月 24 19:55:15

所有顯示的時間為 UTC + 8 小時




發表新文章 回覆主題  [ 15 篇文章 ] 
發表人 內容
文章發表於 : 週一 02 4月 07 16:34:36 
討論區會員

註冊時間: 週六 10 2月 07 14:12:18
文章: 61
i've mounted CY 50/1.4 on 400D body to compare it with canon EFS-17-55 quality. BUT found that the photos taken by CY are always 有偏黃色.

does anyone have such experience!?? and WHY????

i've also tried CY 85/2.8 but there is less yellowish tone.


回頂端
 個人資料  
 
 文章主題 :
文章發表於 : 週一 02 4月 07 18:00:43 
資深討論區會員

註冊時間: 週三 04 1月 06 22:55:14
文章: 3990
唔用菲林玩C/Y只能講︰

獲獲新鮮獲獲甘


回頂端
 個人資料  
 
 文章主題 :
文章發表於 : 週一 02 4月 07 18:48:28 
幹事
幹事

註冊時間: 週日 19 9月 04 19:23:25
文章: 3802
你試算一下...

假設:
C牌鏡頭色彩還完值係=-1
C牌正常機身系統色彩數值=0

要得出一幅色彩值為0的照片才算合格, 怎麼辦?

答案: 非常容易, 數碼機身可以調嘛... 機身+1就合格了...

繼續... 現在手痕換上了一支色彩還完值是0的菲林鏡, 機身再使用但並沒有調回原來數值... 那出來的照片的色彩值應是多少呢...

_________________
放毒二課 首席陪行專員

[二人同行 送你上路]


回頂端
 個人資料  
 
文章發表於 : 週一 02 4月 07 19:15:11 
CONTAX CLUB 會員
CONTAX CLUB 會員

註冊時間: 週三 30 6月 04 12:24:17
文章: 1237
contax122 寫:
i've mounted CY 50/1.4 on 400D body to compare it with canon EFS-17-55 quality. BUT found that the photos taken by CY are always 有偏黃色.

does anyone have such experience!?? and WHY????

i've also tried CY 85/2.8 but there is less yellowish tone.

That's strange. I seldom heard that P50/1.4 is yellowish on 400D. Any sample?


回頂端
 個人資料  
 
 文章主題 :
文章發表於 : 週一 02 4月 07 21:13:59 
討論區會員

註冊時間: 週六 10 2月 07 14:12:18
文章: 61
the most strange thing is that i can't see the yellowish on screen but i see it when i printed out both of them!!!

:shock:


回頂端
 個人資料  
 
 文章主題 :
文章發表於 : 週一 02 4月 07 22:36:18 
討論區管理員

註冊時間: 週四 27 11月 03 02:15:48
文章: 3194
來自: Moon Base Alpha
There is nothing wrong with your Canon. Just the fact that C/Y lens typically are biased this way when compared to your Canon Lens. The color rendering is simply a character of the lens.

_________________
圖檔 圖檔 圖檔


回頂端
 個人資料  
 
 文章主題 :
文章發表於 : 週五 06 4月 07 11:46:13 
討論區會員

註冊時間: 週六 10 2月 07 14:12:18
文章: 61
FR 寫:
There is nothing wrong with your Canon. Just the fact that C/Y lens typically are biased this way when compared to your Canon Lens. The color rendering is simply a character of the lens.



thanks FR.

but i just wonder why my CY/2.8 does not show such yellowish?

when i shot those two CY lens in film, i have not experienced such yellowish photo.


回頂端
 個人資料  
 
 文章主題 :
文章發表於 : 週五 06 4月 07 12:01:09 
顧問 (榮譽)
顧問 (榮譽)

註冊時間: 週六 08 11月 03 09:21:23
文章: 1493
我用Contax Planar 50/1.4 於Canon 30D上不覺有問題

圖檔


回頂端
 個人資料  
 
 文章主題 :
文章發表於 : 週五 06 4月 07 12:14:54 
討論區會員

註冊時間: 週三 24 12月 03 17:09:08
文章: 112
來自: Canada
Did you use "auto white balance"?


回頂端
 個人資料  
 
 文章主題 :
文章發表於 : 週五 06 4月 07 14:06:31 
顧問 (榮譽)
顧問 (榮譽)

註冊時間: 週六 08 11月 03 09:21:23
文章: 1493
cyberstudio 寫:
Did you use "auto white balance"?

yes


回頂端
 個人資料  
 
 文章主題 :
文章發表於 : 週五 06 4月 07 22:22:43 
討論區會員

註冊時間: 週六 10 2月 07 14:12:18
文章: 61
i set both shootings using daylight but not auto whitebalance.

so it should not be the problem.

and i can't see the yellowish on my LCD but can be seen on the print out. i don't know why? but i don't have a scaner to scan the photos.


回頂端
 個人資料  
 
 文章主題 :
文章發表於 : 週五 06 4月 07 22:46:46 
CONTAX CLUB 會員
CONTAX CLUB 會員

註冊時間: 週三 30 6月 04 12:24:17
文章: 1237
contax122 寫:
and i can't see the yellowish on my LCD but can be seen on the print out. i don't know why? but i don't have a scaner to scan the photos.

Then it is not the problem of the lens. It is caused by your post-processing steps or your printer.


回頂端
 個人資料  
 
 文章主題 :
文章發表於 : 週五 06 4月 07 23:06:00 
討論區會員

註冊時間: 週六 10 2月 07 14:12:18
文章: 61
so it's the problem of fotomax!!! ar


回頂端
 個人資料  
 
 文章主題 :
文章發表於 : 週六 07 4月 07 03:31:26 
討論區管理員

註冊時間: 週四 27 11月 03 02:15:48
文章: 3194
來自: Moon Base Alpha
OK, one thing at a time ...

- FOA, one lens might show color while other do not, that's fine, not every lens are the same, and even lens from same Mfr or even same model but different vintage

- LCD viewing vs print. Now unless you got a fully calibrated monitor and a properly converted ICC profiled data output to the print. You cannot, do not, and will not have any control / consistency over the output ( be it on screen or the print ) so its quite common that you would see difference between print and monitor.

To me, it sounds like nothing wrong here, just that there is no control between the capture/viewing & print .. ( Color Space such as sRGB is not a control , just a parameter for processing )

_________________
圖檔 圖檔 圖檔


最後由 FR 於 週日 08 4月 07 01:18:37 編輯,總共編輯了 2 次。

回頂端
 個人資料  
 
 文章主題 :
文章發表於 : 週六 07 4月 07 11:18:29 
資深討論區會員

註冊時間: 週三 04 1月 06 22:55:14
文章: 3990
FR 寫:
OK, one thing at a time ...

- FOA, one lens might show color while other do not, that's fine, noe every lens are the saem, and even lens from same Mfr or even same model but different vintage

- LCD viewing vs print. Now unless you got a fully calibrated monitor and a properly converted ICC profiled data output to the print. You cannot, do not, and will not have any control / consistency over the output ( be it on screen or the print ) so its quite common that you would see difference between print and monitor.

To me, it sounds like nothing wrong here, just that there is no control between the capture/viewing & print .. ( Color Space such as sRGB is not a control , just a parameter for processing )


要做好數碼的Output同在LCD 做好calibration真係唔容易,其實以前在出面晒菲林,有好多野係相店幫我地做好晒(至少理論上)。

菲林和數碼都要花好多心機先可以做得Good Output。

真的不容易! :P


回頂端
 個人資料  
 
顯示文章 :  排序  
發表新文章 回覆主題  [ 15 篇文章 ] 

所有顯示的時間為 UTC + 8 小時


誰在線上

正在瀏覽這個版面的使用者:沒有註冊會員 和 18 位訪客


不能 在這個版面發表主題
不能 在這個版面回覆主題
不能 在這個版面編輯您的文章
不能 在這個版面刪除您的文章

搜尋:
前往 :  
Powered by phpBB® Forum Software © phpBB Group
正體中文語系由 竹貓星球 維護製作