FR 寫:
OK, one thing at a time ...
- FOA, one lens might show color while other do not, that's fine, noe every lens are the saem, and even lens from same Mfr or even same model but different vintage
- LCD viewing vs print. Now unless you got a fully calibrated monitor and a properly converted ICC profiled data output to the print. You cannot, do not, and will not have any control / consistency over the output ( be it on screen or the print ) so its quite common that you would see difference between print and monitor.
To me, it sounds like nothing wrong here, just that there is no control between the capture/viewing & print .. ( Color Space such as sRGB is not a control , just a parameter for processing )
要做好數碼的Output同在LCD 做好calibration真係唔容易,其實以前在出面晒菲林,有好多野係相店幫我地做好晒(至少理論上)。
菲林和數碼都要花好多心機先可以做得Good Output。
真的不容易!