CONTAX CLUB Carl Zeiss 討論區

香港互聯網康泰時攝影會
現在的時間是 週日 28 4月 24 12:44:59

所有顯示的時間為 UTC + 8 小時




發表新文章 回覆主題  [ 15 篇文章 ] 
發表人 內容
 文章主題 : CONTAX 抹鏡
文章發表於 : 週二 04 9月 07 15:21:59 
CONTAX CLUB 會員
CONTAX CLUB 會員

註冊時間: 週日 25 2月 07 02:55:26
文章: 490
想請問各位師兄知不知道Contax Planar 50mm f1.4標準鏡第6組鏡片同埋Contax Distagon 28mm f2.8廣角鏡第4及第5組鏡片是什麼用途(功能)?
日本Kyocera的工程師今日打電話俾我同我講以上ge鏡片就算清洗後都不能夠完全清除鏡片組內ge""所以要換. :shock:


回頂端
 個人資料  
 
 文章主題 :
文章發表於 : 週二 04 9月 07 16:47:37 
CONTAX CLUB 會員
CONTAX CLUB 會員

註冊時間: 週六 08 1月 05 22:54:51
文章: 2268
來自: Hong Kong
引言回覆:
日本Kyocera的工程師


speak english? change is better than cleaning aalthough is more expensive ... go ahead while stock last.

_________________
Contax : RTS, RTSII(50Y), RTSIII, Aria D, Aria(70Y), N1, ND, T3D(70Y), G2D
Nikon : FM3A, FM3AB
Leica : M9, X1
Fuji : X100
OM : EP2


回頂端
 個人資料  
 
 文章主題 :
文章發表於 : 週二 04 9月 07 16:59:29 
CONTAX CLUB 會員
CONTAX CLUB 會員

註冊時間: 週日 25 2月 07 02:55:26
文章: 490
Raimondi 寫:
引言回覆:
日本Kyocera的工程師


speak english? change is better than cleaning aalthough is more expensive ... go ahead while stock last.


Thank you very much your suggestions, in fact I have already ask japan side go ahead but want to know more about those lens group for.
I thnk it is acceptable cleaning price, total I sent 5 lens for cleaning but one GE lens they do not do cleaning due to no lens could be replaced if damaged.


回頂端
 個人資料  
 
 文章主題 : Re: CONTAX 抹鏡
文章發表於 : 週二 04 9月 07 17:11:46 
會長
會長

註冊時間: 週一 06 6月 05 23:31:23
文章: 1010
Ba Bi 寫:
想請問各位師兄知不知道Contax Planar 50mm f1.4標準鏡第6組鏡片同埋Contax Distagon 28mm f2.8廣角鏡第4及第5組鏡片是什麼用途(功能)?
日本Kyocera的工程師今日打電話俾我同我講以上ge鏡片就算清洗後都不能夠完全清除鏡片組內ge""所以要換. :shock:


"" ?
支鏡發

_________________
荒木超人


回頂端
 個人資料  
 
 文章主題 : Re: CONTAX 抹鏡
文章發表於 : 週二 04 9月 07 17:27:54 
CONTAX CLUB 會員
CONTAX CLUB 會員

註冊時間: 週日 25 2月 07 02:55:26
文章: 490
Contax Nelson 寫:
Ba Bi 寫:
想請問各位師兄知不知道Contax Planar 50mm f1.4標準鏡第6組鏡片同埋Contax Distagon 28mm f2.8廣角鏡第4及第5組鏡片是什麼用途(功能)?
日本Kyocera的工程師今日打電話俾我同我講以上ge鏡片就算清洗後都不能夠完全清除鏡片組內ge""所以要換. :shock:


"" ?
支鏡發


回頂端
 個人資料  
 
 文章主題 :
文章發表於 : 週二 04 9月 07 17:34:23 
討論區會員

註冊時間: 週日 28 11月 04 23:49:48
文章: 171
來自: 檳城
Ba Bi 寫:
Raimondi 寫:
引言回覆:
日本Kyocera的工程師


speak english? change is better than cleaning aalthough is more expensive ... go ahead while stock last.


Thank you very much your suggestions, in fact I have already ask japan side go ahead but want to know more about those lens group for.
I thnk it is acceptable cleaning price, total I sent 5 lens for cleaning but one GE lens they do not do cleaning due to no lens could be replaced if damaged.


Hi Ba Bi,
How much does Kyocera quote on the cost to replace the elements? And the cleaning costs itself, is it per lens standard price or varies according to # of elements? Thanks.


回頂端
 個人資料  
 
 文章主題 :
文章發表於 : 週二 04 9月 07 19:27:26 
CONTAX CLUB 會員
CONTAX CLUB 會員

註冊時間: 週三 30 6月 04 12:24:17
文章: 1237
I went to Kyocera this afternoon to get back my AEG 35/1.4. Originally I wanted to replace the front lens element, rear lens element, the lens barrel and also the front filter thread. But none is available so Japan sent the lens back untouched. :cry: :cry: :cry:

Lesson learnt: have your lens serviced as soon as possible if you really want to.


回頂端
 個人資料  
 
 文章主題 :
文章發表於 : 週二 04 9月 07 20:15:05 
CONTAX CLUB 會員
CONTAX CLUB 會員

註冊時間: 週日 25 2月 07 02:55:26
文章: 490
Eng Hun 寫:
Ba Bi 寫:
Raimondi 寫:
引言回覆:
日本Kyocera的工程師


speak english? change is better than cleaning aalthough is more expensive ... go ahead while stock last.


Thank you very much your suggestions, in fact I have already ask japan side go ahead but want to know more about those lens group for.
I thnk it is acceptable cleaning price, total I sent 5 lens for cleaning but one GE lens they do not do cleaning due to no lens could be replaced if damaged.


Hi Ba Bi,
How much does Kyocera quote on the cost to replace the elements? And the cleaning costs itself, is it per lens standard price or varies according to # of elements? Thanks.


For replaced the 6th group lens of 50mm F1.4 + cleaning & calibration about 1.4K+
For replaced the 4th and 5th group lens of 85mm F1.4 + cleaning & calibration about 2.2K+
If calculate with other 2 lens (1 wide + 1 Zoom) the total cost is more than 5K and I think it is acceptable.
Perhaps you may think it is too expensive however, Contax new lens (never been used) is very few.
* Just my point of view *


回頂端
 個人資料  
 
 文章主題 :
文章發表於 : 週二 04 9月 07 20:18:34 
CONTAX CLUB 會員
CONTAX CLUB 會員

註冊時間: 週日 25 2月 07 02:55:26
文章: 490
iamderek 寫:
I went to Kyocera this afternoon to get back my AEG 35/1.4. Originally I wanted to replace the front lens element, rear lens element, the lens barrel and also the front filter thread. But none is available so Japan sent the lens back untouched. :cry: :cry: :cry:

Lesson learnt: have your lens serviced as soon as possible if you really want to.


In last month I also took my Tele-Tessar 200mm F3.5 AEG for cleaning and they also told me Kyocera will not do cleaning this lens due to if the lens is damaged/cleaning could not recover etc. there is no lens for replaced in Kyocera or in Zeiss.
I will continue to use it until ou tof order.


回頂端
 個人資料  
 
 文章主題 :
文章發表於 : 週二 04 9月 07 20:25:59 
CONTAX CLUB 會員
CONTAX CLUB 會員

註冊時間: 週日 25 2月 07 02:55:26
文章: 490
I forgot to tell every C-hing that all Lens I owned (SLR camera) is more than 10 years and this is the first time I took to Universal for cleaning.
Regarding the Universal 2 engineer use eyes inspection there is no any "MO" was found in the lens but only very few dust.
Thus, please do not misunderstood the Zeiss Lens quality not good.


回頂端
 個人資料  
 
 文章主題 :
文章發表於 : 週二 04 9月 07 23:07:14 
CONTAX CLUB 會員
CONTAX CLUB 會員

註冊時間: 週六 08 1月 05 22:54:51
文章: 2268
來自: Hong Kong
As far as I know, there are a no. of lens that Kyocera does not repair now due to lack of lenses elemenets ... 15/3.5, 70-210 are some of them.

If you just look for eye inspection, you could take your lens to Mr Lee who worked in Universal before ... he is now working at Camera Repair Centre.

_________________
Contax : RTS, RTSII(50Y), RTSIII, Aria D, Aria(70Y), N1, ND, T3D(70Y), G2D
Nikon : FM3A, FM3AB
Leica : M9, X1
Fuji : X100
OM : EP2


回頂端
 個人資料  
 
 文章主題 :
文章發表於 : 週三 05 9月 07 13:52:57 
CONTAX CLUB 會員
CONTAX CLUB 會員

註冊時間: 週日 25 2月 07 02:55:26
文章: 490
Raimondi 寫:
As far as I know, there are a no. of lens that Kyocera does not repair now due to lack of lenses elemenets ... 15/3.5, 70-210 are some of them.

If you just look for eye inspection, you could take your lens to Mr Lee who worked in Universal before ... he is now working at Camera Repair Centre.


Thank you very much your value information, if fact those of 4 lens that I sent to Kyocera through "Universal", I contacted Kyocera Japan directly because I would like to know the reason only.


回頂端
 個人資料  
 
 文章主題 :
文章發表於 : 週一 08 10月 07 11:28:33 
討論區會員

註冊時間: 週四 10 2月 05 08:35:32
文章: 286
來自: 英國
I need to replace the rear element of my D35/1.4 MMJ, any one know how much is it?

I still in England and will go back HK soon, any brother can tell me where should I go?


回頂端
 個人資料  
 
 文章主題 :
文章發表於 : 週一 08 10月 07 13:48:04 
CONTAX CLUB 會員
CONTAX CLUB 會員

註冊時間: 週三 30 6月 04 12:24:17
文章: 1237
leo529 寫:
I need to replace the rear element of my D35/1.4 MMJ, any one know how much is it?

I guess 2xxx.

leo529 寫:
I still in England and will go back HK soon, any brother can tell me where should I go?

Universal Optical Industries Ltd. See http://forum.contax-club.org/viewtopic.php?t=75

BTW, how long will you stay in HK? It usually takes 2-3 months to get the item back.


回頂端
 個人資料  
 
 文章主題 :
文章發表於 : 週一 08 10月 07 22:02:05 
討論區會員

註冊時間: 週四 10 2月 05 08:35:32
文章: 286
來自: 英國
I will not come back England......just finished my course :D


回頂端
 個人資料  
 
顯示文章 :  排序  
發表新文章 回覆主題  [ 15 篇文章 ] 

所有顯示的時間為 UTC + 8 小時


誰在線上

正在瀏覽這個版面的使用者:沒有註冊會員 和 84 位訪客


不能 在這個版面發表主題
不能 在這個版面回覆主題
不能 在這個版面編輯您的文章
不能 在這個版面刪除您的文章

搜尋:
前往 :  
Powered by phpBB® Forum Software © phpBB Group
正體中文語系由 竹貓星球 維護製作