CONTAX CLUB Carl Zeiss 討論區

香港互聯網康泰時攝影會
現在的時間是 週五 29 3月 24 03:22:21

所有顯示的時間為 UTC + 8 小時




發表新文章 回覆主題  [ 24 篇文章 ]  前往頁數 上一頁  12
發表人 內容
 文章主題 :
文章發表於 : 週五 25 3月 11 14:40:56 
資深討論區會員

註冊時間: 週五 27 1月 06 12:09:10
文章: 550
來自: Singapore
nightscrawler 寫:
Oh my god...

I dont know the RTSIII is having the slip issues as well. My reason of buying the RTSIII is basically to have a peace mind when I use the 35/1.4. But now I find that the mirror slip issue is still there~ :lol: :evil:

May I know where can I have a proper check on this issue? Any referrals?

Thanks.


My RTS III ok with the 35/1.4. Seems 28/2 has a more protruded rear element or parts.

Now I put my RTS III upside down, so will the mirror slowly slips back to its position hahaha!!

_________________
Rolleiflex 3003, SL2000F - SONY Alpha7R 1/2/4. A1
Carl Zeiss C/Y T* - QBM HFT - ZM T* - ZF T* - Batis T* - Otus T* - Loxia T*
Sony. Zeiss 16-35/4 T* G200600 GM100400 GM600
http://www.fuwen.net


回頂端
 個人資料  
 
 文章主題 :
文章發表於 : 週一 28 3月 11 11:19:32 
討論區會員

註冊時間: 週日 08 11月 09 13:14:21
文章: 77
fuwen 寫:
nightscrawler 寫:
Oh my god...

I dont know the RTSIII is having the slip issues as well. My reason of buying the RTSIII is basically to have a peace mind when I use the 35/1.4. But now I find that the mirror slip issue is still there~ :lol: :evil:

May I know where can I have a proper check on this issue? Any referrals?

Thanks.


My RTS III ok with the 35/1.4. Seems 28/2 has a more protruded rear element or parts.

Now I put my RTS III upside down, so will the mirror slowly slips back to its position hahaha!!


Me too. My RTSIII is still ok with the 35/1.4. But this potential problem is still keeping me uncomfortable to use it with the rear elements protruded lens...umm...I m keeping my RTSIII laid flat on the carbinet from now on as well. :roll:


回頂端
 個人資料  
 
 文章主題 :
文章發表於 : 週五 29 4月 11 08:47:00 
資深討論區會員

註冊時間: 週五 27 1月 06 12:09:10
文章: 550
來自: Singapore
Hahaha I am lucky after placing my RTS III flat for few weeks now its mirror clears the 28/2!

There is a thread in rangefinder forum suggesting using hair dryer to soften the Contax mirror glue and push the mirror back into position for some of the Contax model.

http://www.kyphoto.com/classics/forum/m ... 1299458032

_________________
Rolleiflex 3003, SL2000F - SONY Alpha7R 1/2/4. A1
Carl Zeiss C/Y T* - QBM HFT - ZM T* - ZF T* - Batis T* - Otus T* - Loxia T*
Sony. Zeiss 16-35/4 T* G200600 GM100400 GM600
http://www.fuwen.net


回頂端
 個人資料  
 
 文章主題 :
文章發表於 : 週五 29 4月 11 17:56:14 
討論區會員

註冊時間: 週日 08 11月 09 13:14:21
文章: 77
Congra to you, Fuwen.

I read that thread before too. However, I have taken my RTSIII to the "camera repair centre" for a fix already. its back to normal and now...all my contax cameras laid flat in the dry box, except the 645...

I hope the 645 does not have the same problem... :lol:


回頂端
 個人資料  
 
 文章主題 :
文章發表於 : 週六 09 7月 11 21:56:14 
資深討論區會員

註冊時間: 週五 27 1月 06 12:09:10
文章: 550
來自: Singapore
Few weeks ago I finally decided that my 28f2 something not right based on some ebay photos of the lens. Try to contact the seller but no response. Luckily found a good repair man and now the lens is in good order.

Time to have some fun with the 28f2.

_________________
Rolleiflex 3003, SL2000F - SONY Alpha7R 1/2/4. A1
Carl Zeiss C/Y T* - QBM HFT - ZM T* - ZF T* - Batis T* - Otus T* - Loxia T*
Sony. Zeiss 16-35/4 T* G200600 GM100400 GM600
http://www.fuwen.net


回頂端
 個人資料  
 
 文章主題 :
文章發表於 : 週日 10 7月 11 21:49:13 
CONTAX CLUB 會員
CONTAX CLUB 會員

註冊時間: 週六 08 1月 05 22:54:51
文章: 2268
來自: Hong Kong
What was the problem with your 28/2?

_________________
Contax : RTS, RTSII(50Y), RTSIII, Aria D, Aria(70Y), N1, ND, T3D(70Y), G2D
Nikon : FM3A, FM3AB
Leica : M9, X1
Fuji : X100
OM : EP2


回頂端
 個人資料  
 
 文章主題 :
文章發表於 : 週一 11 7月 11 10:55:04 
資深討論區會員

註冊時間: 週五 27 1月 06 12:09:10
文章: 550
來自: Singapore
Raimondi 寫:
What was the problem with your 28/2?


As I have said my lens has an unusual out of focus behaviour towards the edge of the frame. One obvious situation is when at infinity things far away is sharp at the centre but funny out of focus at the edge at f2. Can see clearly already in view finder. Then one day I was observing the photos of all the 28/2 on ebay. I realised that all of them has a deeper screw thread section (in front of the front element for filters) than mine. So I suspect the lens must have been open up by somebody and did not fix back the floating element properly. Luckily one technician here in Singapore willing to give it a try and it is fixed now. At f2 at infinity everything far away are equally sharp now.

Nearly need to post here see if anyone in HK can fix this. Email Zeiss Germany they replied not servicing this lens anymore.

_________________
Rolleiflex 3003, SL2000F - SONY Alpha7R 1/2/4. A1
Carl Zeiss C/Y T* - QBM HFT - ZM T* - ZF T* - Batis T* - Otus T* - Loxia T*
Sony. Zeiss 16-35/4 T* G200600 GM100400 GM600
http://www.fuwen.net


回頂端
 個人資料  
 
 文章主題 :
文章發表於 : 週一 11 7月 11 13:31:38 
CONTAX CLUB 會員
CONTAX CLUB 會員

註冊時間: 週六 08 1月 05 22:54:51
文章: 2268
來自: Hong Kong
thx for sharing ... so sad that zeiss germany does nopt serve the old lenses anymore ... this is a very great lenses ...

_________________
Contax : RTS, RTSII(50Y), RTSIII, Aria D, Aria(70Y), N1, ND, T3D(70Y), G2D
Nikon : FM3A, FM3AB
Leica : M9, X1
Fuji : X100
OM : EP2


回頂端
 個人資料  
 
 文章主題 :
文章發表於 : 週五 15 7月 11 14:41:31 
討論區會員

註冊時間: 週日 08 11月 09 13:14:21
文章: 77
Hi Fuwen hing, congragulations. I got the 28/2 recently too. Though I dont have much time to have a through test on it, (only tested for a few frames), I realise that this is one of the very good lens from Zeiss. :D


回頂端
 個人資料  
 
顯示文章 :  排序  
發表新文章 回覆主題  [ 24 篇文章 ]  前往頁數 上一頁  12

所有顯示的時間為 UTC + 8 小時


誰在線上

正在瀏覽這個版面的使用者:沒有註冊會員 和 19 位訪客


不能 在這個版面發表主題
不能 在這個版面回覆主題
不能 在這個版面編輯您的文章
不能 在這個版面刪除您的文章

搜尋:
前往 :  
cron
Powered by phpBB® Forum Software © phpBB Group
正體中文語系由 竹貓星球 維護製作