CONTAX CLUB Carl Zeiss 討論區

香港互聯網康泰時攝影會
現在的時間是 週四 28 3月 24 22:16:49

所有顯示的時間為 UTC + 8 小時




發表新文章 回覆主題  [ 54 篇文章 ]  前往頁數 上一頁  1234  下一頁
發表人 內容
 文章主題 :
文章發表於 : 週二 05 12月 06 19:16:30 
資深討論區會員

註冊時間: 週五 27 1月 06 12:09:10
文章: 550
來自: Singapore
Me too very excited about it. Hope it is easy.

_________________
Rolleiflex 3003, SL2000F - SONY Alpha7R 1/2/4. A1
Carl Zeiss C/Y T* - QBM HFT - ZM T* - ZF T* - Batis T* - Otus T* - Loxia T*
Sony. Zeiss 16-35/4 T* G200600 GM100400 GM600
http://www.fuwen.net


回頂端
 個人資料  
 
 文章主題 :
文章發表於 : 週二 05 12月 06 20:41:02 
CONTAX CLUB 會員
CONTAX CLUB 會員

註冊時間: 週六 08 1月 05 22:54:51
文章: 2268
來自: Hong Kong
ryhl, can't wait to see your modification photos too.

would u consider this PK->C/Y mount modification as a part-time business? i will be your next customer after octopus then. count me in.

:P

_________________
Contax : RTS, RTSII(50Y), RTSIII, Aria D, Aria(70Y), N1, ND, T3D(70Y), G2D
Nikon : FM3A, FM3AB
Leica : M9, X1
Fuji : X100
OM : EP2


回頂端
 個人資料  
 
 文章主題 :
文章發表於 : 週二 05 12月 06 23:27:17 
CONTAX CLUB 會員
CONTAX CLUB 會員

註冊時間: 週六 08 11月 03 01:36:09
文章: 8818
ryhl .. 請有空 post 些 K100 + C/Y 的作品。我很想看看。現在 K100 幾銀 ?


回頂端
 個人資料  
 
 文章主題 :
文章發表於 : 週三 06 12月 06 00:04:43 
討論區新手

註冊時間: 週六 02 9月 06 12:01:12
文章: 28
Sorry to have kept brothers waiting. Here is a walkthrough of the works for the modification of the K mount. I shall use Chinese on those parts which are more complicated (as my penpower at home is very unstable and slow, so cannot use Chinese for all of the contents) -

First, a comparison of the K mount before and after the modification-

圖檔

You can see the small portions of the mount to be removed which are marked in blue -

圖檔


回頂端
 個人資料  
 
 文章主題 :
文章發表於 : 週三 06 12月 06 00:15:02 
討論區新手

註冊時間: 週六 02 9月 06 12:01:12
文章: 28
Forgotten to mention. Only the 3 areas marked in blue in the second picture in the previous message need to be removed. The whole inner ring of the mount which appeared to have been altered is due to minor adjustment works which may not be needed for individual camera. I shall provide more detailed explanations later on.

The 2 pictures below indicate why the areas marked in blue need to be removed.

1. A C/Y lens can be placed in a K mount without any modification. But the blue areas which is of the same thickness as the C/Y mount blades obstruct the lens to be screwed in the body mount -
圖檔

2. With the removal of the areas marked in blue, the C/Y lens can now be screwed in the K body mount :D

圖檔


回頂端
 個人資料  
 
 文章主題 :
文章發表於 : 週三 06 12月 06 00:21:06 
事務局長
事務局長

註冊時間: 週日 09 11月 03 03:42:29
文章: 12296
just want to know...after modification, can original Pentax K mount lens still able to fix to that camera?

_________________
事務局長

Damn, my Calon Segur heart fall in love with Haut Brion


回頂端
 個人資料  
 
 文章主題 :
文章發表於 : 週三 06 12月 06 00:25:56 
討論區新手

註冊時間: 週六 02 9月 06 12:01:12
文章: 28
With the removal of the areas marked in blue, basically C/Y lenses are now able to screw in the K mount. However, Pentax cameras have another feature which obstruct the screw-in of the C/Y lenses - the 限位裝置(for the M42 adaptor ring) on the thin metal piece that is used to grip lenses tightly to the body.

Position of the thin metal piece in the K100D body -
圖檔

The exact position of the 限位裝置 on the metal piece (circled in the picture). The one on the right is the original 限位裝置. We have to remove it which now appears as the one on the left -

圖檔

With the removal of this 限位裝置, now our C/Y lenses can be screwed in perfectly into the K mount 8)


回頂端
 個人資料  
 
 文章主題 :
文章發表於 : 週三 06 12月 06 00:28:38 
討論區新手

註冊時間: 週六 02 9月 06 12:01:12
文章: 28
vincenthoy28 寫:
just want to know...after modification, can original Pentax K mount lens still able to fix to that camera?


Yes. Pentax AF K mount lenses can still be able to fix perfectly and function in the normal way after the modification :D


回頂端
 個人資料  
 
 文章主題 :
文章發表於 : 週三 06 12月 06 00:37:30 
討論區新手

註冊時間: 週六 02 9月 06 12:01:12
文章: 28
With the above modifications, basically the Pentax cameras are ready for C/Y lenses. However, for my K100D, I have encountered another problem which I do not notice at the first instance - that is, the exact register of my K100D is slightly longer than that of my C/Y lenses, i.e. it is more than 45.5 mm :shock: This rendered my C/Y lenses cannot focus to infinity...

So, have to carry out more modifications one more time -

The first step of this further modification is to sand away a thin layer of the K body mount by sanding paper. I have sanded away about 0.2 mm or so in the process.

The second step is to remove some plastic body material supporting the metal mount ring in the camera body. I used a 筆刀 to pill away a very thin layer of the camera body, as illustrated in the following pic -

圖檔

After this further modification, the infinity-focus problem is finally rectified.


回頂端
 個人資料  
 
 文章主題 :
文章發表於 : 週三 06 12月 06 00:44:56 
討論區新手

註冊時間: 週六 02 9月 06 12:01:12
文章: 28
Some cautions if any brother would like to try the above modification. Although the exterior appearance of the camera would largely remain the same, there will be some minor scratchs (caused by the pins protruding from the C/Y lenses) inside the camera.

(note : the scratches on the metal mount is not the product of the modification. They are the result of my earlier experimental attempt in converting my mutar I into K mount when I have yet to figure out the above modification method) -

圖檔

圖檔

See if my little experience will be of use to brothers who are interested in using C/Y lenses on Pentax DSLRs :wink:


回頂端
 個人資料  
 
 文章主題 :
文章發表於 : 週三 06 12月 06 00:48:53 
討論區新手

註冊時間: 週六 02 9月 06 12:01:12
文章: 28
章魚 寫:
ryhl .. 請有空 post 些 K100 + C/Y 的作品。我很想看看。現在 K100 幾銀 ?


Sure brother octopus :) The price of K100D body should be around $4,500 - $4,600.


回頂端
 個人資料  
 
 文章主題 :
文章發表於 : 週三 06 12月 06 01:42:14 
事務局長
事務局長

註冊時間: 週日 09 11月 03 03:42:29
文章: 12296
I have tried this to my ist DL and I would like to advised that there is one small black wire connecting to 限位裝置(for the M42 adaptor ring). Please be careful not to disconnect that or you have to solder it back after disconnect. Else you will lose the AF function... :wink:

_________________
事務局長

Damn, my Calon Segur heart fall in love with Haut Brion


回頂端
 個人資料  
 
 文章主題 :
文章發表於 : 週三 06 12月 06 08:41:48 
CONTAX CLUB 會員
CONTAX CLUB 會員

註冊時間: 週日 27 3月 05 22:24:52
文章: 1229
jason.lau 寫:
I start to regret I sold all my C/Y......... :x


It is always not too late to collect them again!!! :twisted:

_________________
學歷: 吸毒工程系榮譽畢業生
職業: 放毒工程有限公司 - 十九代工程師
圖檔


回頂端
 個人資料  
 
 文章主題 :
文章發表於 : 週三 06 12月 06 09:13:46 
討論區會員

註冊時間: 週四 12 8月 04 08:54:31
文章: 315
ryhl,

Appreciate your sharing and the courage of testing out the modification which no one has done before.

From your explaination, basically, I have concluded 4 major steps for the modification on Your K100D:

1. Remove the blue marked area of the mount.
2. Remove the thin metal (M42 stopper) on the 2nd layer ring beneath the mount
3. Sand away 0.2mm of thickness of the plastic body mount
4. Cut away part of the plastic support for the metal mount (This part I don't understand, please further explain if you don't mind)

For step 1, do we need a metal sanding machine? Those hand held one for model making?

After step 3, the register size is smaller, can you still use your K mount lens for whole range focusing?

Again, thanks for your work.


回頂端
 個人資料  
 
 文章主題 :
文章發表於 : 週三 06 12月 06 09:15:15 
討論區會員

註冊時間: 週四 12 8月 04 08:54:31
文章: 315
vincenthoy28 寫:
I have tried this to my ist DL and I would like to advised that there is one small black wire connecting to 限位裝置(for the M42 adaptor ring). Please be careful not to disconnect that or you have to solder it back after disconnect. Else you will lose the AF function... :wink:


You have tried it already? wow...行動派 :)


回頂端
 個人資料  
 
顯示文章 :  排序  
發表新文章 回覆主題  [ 54 篇文章 ]  前往頁數 上一頁  1234  下一頁

所有顯示的時間為 UTC + 8 小時


誰在線上

正在瀏覽這個版面的使用者:沒有註冊會員 和 14 位訪客


不能 在這個版面發表主題
不能 在這個版面回覆主題
不能 在這個版面編輯您的文章
不能 在這個版面刪除您的文章

搜尋:
前往 :  
cron
Powered by phpBB® Forum Software © phpBB Group
正體中文語系由 竹貓星球 維護製作